Electric Fireplace Switch Not Working | How Can I Solve It?

Key Points:

  • There are several reasons for an electrical switch to fail
  • Mechanical failure and burnt fuse are the most common ones
  • You can make your electric fireplace work again by replacing the bad switch and ensuring proper connectivity

Like any other electrical component, problems such as the electric fireplace switch not working are common. Knowing the reason behind the problem and the method to solve it is everyone’s concern.

When the connection is broken or the switch becomes non-functional, the electric switch won’t be doing its job.

With the help of my described troubleshooting steps, anyone can fix this issue within minutes. Without further ado, let’s see how it is done.

Electric Fireplace Switch FailureReason
Mechanical problemAfter a certain period, some parts of the switch can fail to operate
Burnt fuseToo much voltage can cause a fuse to get burnt and save the device
Loose wire connectionNumerous reasons for loose connection
Faulty circuitAny bad component in the circuit can make a switch look bad

Why is My Electric Fireplace Switch Not Working?

For 4 main reasons, your electric fireplace switch may not work. A broken switch, burnt fuse, loose connectivity, and faulty circuit board are those points.

Here, I am going to explain the causes so that you can fix them in no time.

Broken Switch

The first common cause is having a broken switch. If the internal mechanism of the switch is somehow broken, your electric fireplace switch won’t turn it on.

In case of this situation, you will have no other option but to replace the switch with a new one.

Burnt Fuse

When the main electricity line provides more voltage than the standard, it can seriously damage an electrical device.

That is why there are fuses in between to protect your electric fireplace. Check out whether there is a burnt fuse, and replace it.

Loose Connection

Sometimes, loose wire connections can also lead to non-functioning switches. In that case, you have to use a multimeter to check the connectivity.

I think that contacting a professional electrician is required to solve this issue.

Faulty Circuit

Lastly, a faulty circuit board can also keep the whole thing turned off. No matter how many times you try, the switch won’t do its job.

Initially, you may think that the problem is in the switch. But in reality, the problem is inside the box.

How Do You Fix an Electric Fireplace Switch?

The first thing you have to do is check the connection for enough voltage to power up the fireplace. Also, fix loose connections so that the circuit gets completed. In both cases, your switch is not the culprit.

Lastly, inspect the switch on the wall. In most cases, the electric switch goes bad making it impossible to turn on the fireplace.

Step 1: Get started by purchasing a new compatible switch and other necessary components to do the installation. I have seen that some electric fireplace uses dimmer switch which is not durable enough. So, you should buy a toggle switch, and be tension-free for a long time.

Step 2: Before starting the installation, make sure to turn off the circuit breaker because safety is your first concern here. Removing only the fuse for your electric fireplace will be enough.

Important: After finishing step 2 as described, you should also turn off the pilot and ignition switches for maximum safety and security. 

Step 3: Now, remove the old switch using the screwdriver. Here, you have to carefully take the circuit board out by taking off the old screws and pulling the wires out.

Step 4: Then, replace the old switch with the old one, and make sure that the wire connections are not loose.

Step 5: Finally, restore the circuit breaker for your fireplace, and test the system by turning the switch on.

Still, seeing no sign of fire getting started, you will have to call a technician to look into the matter.

Frequently Asked Question (FAQs):

How do I reset my electric fireplace?

You can easily reset an electric fireplace by turning all the switches to the off position, unplugging it from the wall, and putting everything back on after 5 minutes.

What is the electric fireplace fuse location?

The location of the fuse location in electric fireplaces varies depending on the model. Usually, you will find them inside the unit. The circuit board controlling the whole unit has the fuse holder.

What makes an electric fireplace stop working?

Loose wire, bad switch, or blown fuse can make an electric fireplace stop working.

Conclusion

I focused solely on the one-switch setup while discussing the electric fireplace switch not working.

Your fireplace may have two switches; one for physical control, and another for remote control.

Nonetheless, the process is the same. If the switches are the culprit, you have to replace them with good ones.

Ref.: